New 4052M Heavy Duty Compact Utility Tractor

Specifications

Compare >>> Select up to 2 models to compare specifications

John Deere4052M Heavy Duty Compact Utility Tractor

Add Model --Please Select-- 4052M HST/PRT (Model year 2024) 4066M (Model year 2024) Gear 4WD / HST 4WD 4066M Heavy Duty (Model year 2024)

Add Model --Please Select-- 4052M HST/PRT (Model year 2024) 4066M (Model year 2024) Gear 4WD / HST 4WD 4066M Heavy Duty (Model year 2024)

Engine power (gross)	37.9 kW 51.5 hp PS at 2600 rpm SAE J1995 rated power
Power take-off (PTO) power	eHydro™ transmission: 30.5 kW 40.9 hp Per SAE J1995
Steering hydraulics	23.5 L/min 6.2 gpm
Implement hydraulics	42.3 L/min 11.2 gpm
Hitch type	Category 1/Category 2
Lift capacity, 24-in. behind link arms	1135 kg 2500 lb
Standard transmission; forward/reverse	eHydro transmission
Cruise control	Standard
Approximate shipping weight (open-station; cab)	Open station: 1943 kg 4255 lb Cab: Not applicable
Wheelbase	185.5 cm 73 in.

Family	EYDXL2.09TDA FYDXL2.09TDA GYDXL2.09TDA
Manufacturer	Yanmar®
Engine model	4TNV86CT-MJT
Engine power (gross)	37.9 kW 51.5 hp PS at 2600 rpm SAE J1995 rated power
Power take-off (PTO) power	eHydro™ transmission: 30.5 kW 40.9 hp Per SAE J1995
Rated engine speed	2600 rpm
Type	Diesel
Injection pump type	High-pressure common rail direct injection
Aspiration	Turbocharged
Emissions compliance	Final Tier 4
Cylinders/displacement	4 cylinders 2.091 L 127.6 cu in.
Number of cylinders	Four
Cylinder liners	Cast-in-block
Bore and stroke	86 x 90 mm 3.4 x 3.54 in.
Compression ratio	19.1:1
Lubrication	Pressurized
Cooling system	Liquid
Air cleaner	Dual element with electronic restriction indicator
Engine torque at rated speed	139 Nm 102.5 lb-ft
Fuel tank capacity	56.9 L 15 U.S. gal.

Battery size	770 CCA
Alternator (12-V)	75 amp
Starter size	2 kW 2.68 hp

Type	High pressure common rail direct injection
Fuel consumption

Standard transmission; forward/reverse	eHydro transmission
Optional transmission; forward/reverse
Left-hand reverser
Transmission gear ranges	eHydro - Infinitely-variable three range
Final drive	Planetary
Brakes	Multi-plate wet disc
Steering	Hydrostatic power steering
Clutch, wet/dry	Wet
Clutch disk diameter wet clutch	129 mm 5.08 in.
Axle capacity	Front 1600 kg 3528 lb Rear 2400 kg 5292 lb
Creeper	SpeedMatch™ standard
Cruise control	Standard
Differential lock	Yes
Drawbar maximum vertical load

Type	Open center
Pump rated output	Steering 23.5 L/min 6.2 gpm Implement 42.3 L/min 11.2 gpm
Pump type	Single gear
Maximum operating pressure
Draft control sensing	Position control
Remote control valves available	Two remotes standard

Type	Category 1/Category 2
Lift capacity, 24-in. behind link arms	1135 kg 2500 lb

Standard	Independent 540 rpm at 2600 rpm
Optional	540E rpm
Control	Independent
Clutch	Wet disc
Brake (for mid and rear PTO)
Engagement method

Crankcase with filter	5.3 L 1.4 gal.
Transmission and hydraulic system	47.3 L 12.5 gal.

Type	Planetary
Differential lock	Yes

Rollover protective structure	Type Foldable Yes
Platform - flat/straddle	Flat
Gear shift location - console/floor

Compliance
Visibility
Air conditioning, temperature differential
Doors
Noise rating
Seat equipment

Height
Wheelbase	185.5 cm 73 in.
Front axle clearance	35.1 cm 13.8 in.
Turning radius with brakes	2.8 m 9.19 ft
Turning radius without brakes	3 m 9.84 ft
Limited slip differential
Approximate shipping weight (open-station; cab)	Open station: 1943 kg 4255 lb Cab: Not applicable

Front	R4 Industrial 31.5x13-16.5
Rear	R4 Industrial 16.9-24 R4 Industrial 19.5L-24
Front tread range	1374.6 mm 54.1 in.
Rear tread spacing	1375 mm 54.1 in. 1495 mm 58.9 in.

Toolbox
Tilt steering wheel
12-V Outlet