New DH53 Series Offset Disks

Offset Disks
REQUEST A QUOTE
REQUEST A QUOTE
Key Features
  • Adjustable disk blade scrapers
  • Rear hitch for attaching additional implement
  • Transport locks secure disk wings
  • Oil bath tapered roller bearings minimize maintenance

More Info

Features

Oil bath tapered roller bearings minimize maintenance
Minimal maintenance increases work hoursMinimal maintenance increases work hours
Sealed with industrial-grade sealsSealed with industrial-grade seals

Oil bath tapered roller bearings, sealed with industrial-grade seals, keep maintenance to a minimum and profitable working hours at a maximum. The bearings come complete with a wear plate.

Disk blade sizes and weight per blade provide superior ground penetration
Available in notched disk blades for front and rearAvailable in notched disk blades for front and rear
Notched disk blades available in three sizesNotched disk blades available in three sizes

Disk blades on the DH53 Series Offset Disks are available in 71.1-cm, 76.2-cm, or 81.3-cm (28-in., 30-in, or 32-in.) diameter. The weight per blade on these disks ranges from 152.9 kg to 241.8 kg (337 lb to 533 lb) for superior penetration in tough soil conditions.

 

Only notched disk blades for front and rear are available on the DH53 Series models.

Transport locks secure disk wings
Transport locks secure disk wings cylinderTransport locks secure disk wings cylinder

Transport locks are standard, ensuring disk wings are in secure transport mode.

Adjustable disk blade scrapers increase productivity
Scrapers clean disk bladesScrapers clean disk blades
Scrapers work great in wet and sticky soilsScrapers work great in wet and sticky soils

Adjustable disk blade scrapers keep disk blades clean and performing in wet and sticky soils for increased productivity.

Rear hitch for attaching an additional implement
Allows operator to pull an additional implementAllows operator to pull an additional implement

A rear hitch is available for operators wanting to pull an additional implement such as a harrow or drag. 

End washers and wrenches keep gang shaft end nut tight
Keeping gangs tightened increases wear lifeKeeping gangs tightened increases wear life
Gang nut wrenches are always there when neededGang nut wrenches are always there when needed

End washers help keep the gang shaft end nut tightened during operation, increasing gang wear life. 

 

Two gang nut wrenches are supplied with each unit and securely attached to the unit, ready to use when the gangs need tightening.  

Clevis hitch is durable for those tough working conditions
Clevis hitch makes hookup easyClevis hitch makes hookup easy
Clevis hitch is built strong for tough jobsClevis hitch is built strong for tough jobs

The clevis hitch has a durable design and is designed for ease of use, long life, and tough working conditions.

Two separate control arms create consistent performance
Control arms level in ground and during transportControl arms level in ground and during transport
Easy to set for desired soil conditionEasy to set for desired soil condition

Two separate control arms are standard, one for transport leveling and one for leveling while the disk is in the ground. Once set for a given soil condition, the disk will continue to perform with consistency.

Specifications

Compare >>>

Select up to 2 models to compare specifications

John DeereDH53 Series Offset Disks
Add Model
Add Model
Transport
Width 3.4 m
11 ft
Ground clearance with base blades 22.9 cm
9 in.
Wheel hub bearings Dual Tapered Roller Bearings
Height
Length
Working
Approximate working width 3 m
10 ft
Maximum penetration 22.9 cm
9 in.
Weight
Net 3866.9 kg
8525 lb
Weight per disk blade 203.7 kg
449 lb
Tractor requirements
Recommended PTO hp range 105-132 kW
141-176 hp
Recommended drawbar hp range 89.5-111.9 kW
120-150 hp
Frame
Type Single Offset Rigid
Duty Heavy
Tube size 15.2x15.2x0.95 cm
6 x 6 x 3/8 in.
Hitch
Front hitch type Spade
Bolt-on rear hitch
Disk blades
Spacing 30.5 cm
12 in.
Quantity 21
Type Notched (front) Notched (rear)
Standard
Blade concavity Standard: high
Optional: low
Available blade sizes
Blade option one 711x9.5 mm
28x0.375 in.
Blade option two 762x9.5 mm
30x0.375 in.
Blade option three 813x9.5 mm
32x0.375 in.
Blade option four
Blade option five
Blade option six
Disk gangs
Front angle 2 Positions
Rear angle 2 Positions
Furrow fillers
Axle size 6.4 cm
2.5 in.
Axle material Round Heat Treated Alloy Steel Threaded on Both Ends
Bearing type Oil Bath Tapered Roller
Bearing wear plates Standard
Bearing standards Welded, Reinforced
Scrapers Adjustable
Lighting and safety
Markings SMV
Safety tow chain Yes
Lights Yes
Tires
Type Implement - Quantity of 4
Size 12.5L x 15 10 ply in.
Wheel hub type 8 Bolt
Set-up time
Labor hours 2-3 for two people
Warranty
Time period 1 year