New DH52F Series Folding Offset Disks

Offset Disks
Key Features
  • Adjustable disk blade scrapers
  • Disk blades (notched or smooth) available in two sizes
  • Rear hitch for attaching additional implement
  • Oil bath tapered roller bearings minimize maintenance

More Info


Disk blades (notched or smooth) available in two sizes
Notched disk bladesNotched disk blades
Smooth disk bladesSmooth disk blades

Disk blades are available in 66-cm or 71-cm (26-in. or 28-in.) diameters. Disk blades are available in smooth blades, notched blades, or a combination of front notched blades and rear smooth blades to meet a variety of needs.


For superior penetration in tough soil conditions, weight per blade ranges from 108.9 kg to 154.7 kg (240 lb to 341 lb) depending on the offset disk series and model.

Transport locks secure disk wings
Transport locks secure disk wings cylinderTransport locks secure disk wings cylinder

Transport locks are standard, ensuring disk wings are in secure transport mode.

End washers and wrenches keep gang shaft end nut tight
Keeping gangs tightened increases wear lifeKeeping gangs tightened increases wear life
Gang nut wrenches are always there when neededGang nut wrenches are always there when needed

End washers help keep the gang shaft end nut tightened during operation, increasing gang wear life. 


Two gang nut wrenches are supplied with each unit and securely attached to the unit, ready to use when the gangs need tightening.  

Adjustable disk blade scrapers increase productivity
Scrapers clean disk bladesScrapers clean disk blades
Scrapers work great in wet and sticky soilsScrapers work great in wet and sticky soils

Adjustable disk blade scrapers keep disk blades clean and performing in wet and sticky soils for increased productivity.

Clevis hitch is durable for those tough working conditions
Clevis hitch makes hookup easyClevis hitch makes hookup easy
Clevis hitch is built strong for tough jobsClevis hitch is built strong for tough jobs

The clevis hitch has a durable design and is designed for ease of use, long life, and tough working conditions.

Two separate control arms create consistent performance
Control arms level in ground and during transportControl arms level in ground and during transport
Easy to set for desired soil conditionEasy to set for desired soil condition

Two separate control arms are standard, one for transport leveling and one for leveling while the disk is in the ground. Once set for a given soil condition, the disk will continue to perform with consistency.

Oil bath tapered roller bearings minimize maintenance
Minimal maintenance increases work hoursMinimal maintenance increases work hours
Sealed with industrial-grade sealsSealed with industrial-grade seals

Oil bath tapered roller bearings, sealed with industrial-grade seals, keep maintenance to a minimum and profitable working hours at a maximum. The bearings come complete with a wear plate.

Rear hitch for attaching an additional implement
Allows operator to pull an additional implementAllows operator to pull an additional implement

A rear hitch is available for operators wanting to pull an additional implement such as a harrow or drag. 


Compare >>>

Select up to 2 models to compare specifications

John DeereDH52F Series Folding Offset Disks
Add Model
Add Model
Width 3.8 m
12.5 ft
Ground clearance with base blades 20.3 cm
8 in.
Wheel hub bearings Dual tapered roller bearings
Approximate working width 7.3 m
24 ft
Maximum penetration 22.9 cm
9 in.
Net 6804 kg
15000 lb
Weight per disk blade 124 kg
273 lb
Tractor requirements
Recommended PTO hp range 175-228 kW
235-306 hp
Recommended drawbar hp range 149.1-193.9 kW
200-260 hp
Type Single offset folding
Duty Medium
Tube size 15.2x15.2x0.95 cm
6x6x0.375 in.
Front hitch type Spade
Bolt-on rear hitch
Disk blades
Spacing 26.7 cm
10.5 in.
Quantity 57
Type Notched (front) Notched (rear)
StandardSmooth (front) Smooth (rear)
OptionalNotched (front) Smooth (rear)
Blade concavity Standard: high
Optional: low
Available blade sizes
Blade option one 660x7.9 mm
26x0.312 in.
Blade option two 711x7.9 mm
28x0.312 in.
Blade option three
Blade option four
Blade option five
Blade option six
Disk gangs
Front angle 2 Positions
Rear angle 2 Positions
Furrow fillers
Axle size 4.1 cm
1.625 in.
or 5.4 cm
2.125 in.
Axle material Round heat treated alloy steel threaded on both ends
Bearing type Oil bath tapered roller
Bearing wear plates Standard
Bearing standards Welded, Reinforced
Scrapers Adjustable
Lighting and safety
Markings SMV
Safety tow chain Yes
Lights Yes
Type Implement - Quantity of 4
Size 12.5L x 15 10 ply in.
Wheel hub type 8 Bolt
Set-up time
Labor hours 4-6 for two people
Time period 1 year
Key Specs
Approximate working width
Disk blades
Notched (front) Notched (rear)
Recommended drawbar hp range
Transport - Width