New 1895 Separate Fertilizer Placement (SFP) Air Drill

Air Drills
REQUEST A QUOTE
REQUEST A QUOTE
Key Features
  • New 60-foot model delivers 40% greater coverage
  • Optional air seeder row markers
  • Blockage warning systems can save skips in field
  • Open center hydraulic check valve

More Info

Features

RelativeFlow™ Blockage sensing
RelativeFlow blockage sensingRelativeFlow blockage sensing

With the RelativeFlow blockage system, operators can see the flow rate of both seed and fertilizer from inside the tractor cab when seeding with the 15.2-m (50-ft) and 18.3-m (60-ft) 1890, as well as the 18.3-m (60-ft) 1895 and the 23-m (76-ft) 1870. Sensors on secondary hoses monitor the relative rate of product flow. An easy-to-read display clearly visualizes relative product flow across the drill, from opener to opener. This exclusive technology gives a better view of what is happening from the cart to the opener in order to spot problems before blockage occurs.

Below are the GreenStar™ 3 (GS3) 2630 Display screens for the blockage monitoring system. For complete details and information, see the owner’s manual.

Blockage monitoring screenBlockage monitoring screen

The RelativeFlow system chart shows the amount of flow through each sensor on the selected tower. Sensitivity for the blockage system can be adjusted if desired, as shown below.

Blockage set-up screenBlockage set-up screen

Blockage warning sensitivity allows the producer to set and change the sensitivity of the sensors to meet their preferences. Increasing the sensitivity means the system is more likely to show a false blockage, while less sensitivity means the system is more likely to miss a blockage.

Multiple run-page alarm behavior options are available for selection.

Blockage set-up screenBlockage set-up screen

Blockage alarm delays can be set up by clicking on the advanced settings button from the blockage set-up screen.

  • A blockage delay is how long a blockage should occur before an alarm is sounded.
  • The blockage alarm reminder is how often the alarm should sound when a blockage occurs.
  • The meter on delay is the time from when the meter is turned on until the blockage sensor should start monitoring for blockage.
  • The meter off delay is the time from when the meter is turned off until the blockage sensor should start monitoring to verify no flow.

For more detailed information, see the owner’s manual.

Spoked gauge wheels
#
#

Growers have historically had to make some difficult planting and seeding decisions due to weather. Operators have been forced to plant in wet conditions that are far from optimal in order to plant within the optimum planting window. Those operators have experienced poor performance from wet soils working in between the depth gauge wheel and the opener disk and not having a way out. This creates the possibility of the depth gauge wheel or opener disk to seize up and drag through the soil.

 

The spoke gauge wheel is a solution for operators who plant in these conditions to allow the mud and debris that get caught behind the depth gauge wheel to easily flow through the wheel and continue providing superior depth performance.

 

The spoke gauge wheel is designed for optimum performance. Its features include serviceable, stamped inner and outer rims. The wheel also has cast spokes and bearing hubs for increased strength. This allows smaller spokes, creating larger open surface area for mud and debris to flow more easily than competitor’s wheels. Another improvement over the closed gauge wheel is a snap-ring bearing retention. The wheel does not need to be taken apart and the bearing does not need to be pressed out. Simply remove the snap ring, replace the bearing, and place the snap ring back.

Gauge wheelGauge wheel
Gauge wheelGauge wheel

Heavy trash fields from no-till environments have also tested very well with the new spoke gauge wheel. Some growers provided feedback of crop residue getting inside and jamming up the gauge wheel and opener. This spoke gauge wheel has shown exceptional performance within these areas as well. These wheels are compatible with both 90 Series openers on seeding tools and planter row-units.

 

Below is a chart that demonstrates a competitive advantage over MudSmith™ wheels for mud and residue flow:

 

   MudSmithJohn DeerePercent improvement
Open area329 cm2 (51 cu in.)471 cm2 (73 cu in.)43 percent
Rim height1.9 cm (3/4 in.)1.4 cm (9/16 in.)25 percent
Spoke width3.5 cm (1-3/8 in.)1.9 cm (3/4 in.)45 percent

 

The wheel is serviceable along with other parts.

  • AA86055 – complete wheel assembly
  • A101570 – inner wheel rim half
  • A101571 – outer wheel rim half

Not compatible in dual gauge wheel applications.

 

MudSmith is a trademark of MudSmith, LLC.

Pressure monitoring and adjustments

A digital pressure sensor is located inside of each tank on the C850, enabling a reliable tank-pressure readout on the cart’s side display and the cab of the tractor on the Gen 4 4600 CommandCenter™ display. Seeing the digital readout allows for fine tuning of tank pressure, needed for metering accuracy on fine low-rate commodities.

Making adjustments:
#

Adjusting tank pressure is done at the side of the cart using the banjo handles pictured above. The decals in yellow indicate with what tank the handle is associated. The white and black decal has a spectrum of low to high tank pressure for dialing in the adjustment and shows to what primary the air is being mapped. Tank pressure indicators will be shown on the Gen 4 CommandCenter.

High-floatation tires improve machine performance
Tires on the 1895 Disk DrillTires on the 1895 Disk Drill

The 18.3-m (60-ft) 1895 Disk Drill offers larger mainframe and wing tires with higher floatation, resulting in less overall surface compaction while minimizing emergence issues. All tires on the 18.3-m (60-ft) machine are 207 kPA (30 psi). The mainframe and wing tires are equipped with casters and walking beams to allow for better ground following.

 

ModelWidthMainframe
tire size
Wing tire sizeMainframe
tire pressure
Wing tire
pressure
189513.1 m (43 ft)31x13.5-1531x13.5-15483 kPa (70 psi)310 kPa (45 psi)
189518.3 m (60 ft)550/45-22.533x15.5-16.5207 kPa (30 psi)207 kPa (30 psi)
Wing tiresWing tires
Mainframe tiresMainframe tires
Independent seed and fertilizer down pressure adjustment
Down pressure adjustment for seed or fertilizer Down pressure adjustment for seed or fertilizer

Setting the opener down pressure is convenient and easy to adjust.

For 9.1-, 11.0-, 12.2-, and 13.1-m (30-, 36-, 40-, and 43-ft) widths the down pressure on the front fertilizer rockshaft is adjusted independently of the middle and rear seed opener rockshafts. Simply dial in the required pressure using the knobs.

The seed opener pressure gauge face is color coded to provide a guide for normal pressure operating ranges.

Valve blockValve block

The valve has two internal checks to reduce possibility of damage to valve when charging the system.

The down pressure cylinder is connected to live hydraulics and extends or retracts to maintain uniform down pressure on openers.

This system is compatible with either closed center or pressure flow compensated tractor hydraulic systems.

IMPORTANT: Tractors with open-center hydraulics require an open-center kit with change valve (order code 6505 to make the air drill compatible). The open-center application does not provide an opener flexibility feature.

Wider working width increases productivity
Wider width for more productivityWider width for more productivity

This 1895 Disk Drill is 18.3-m (60-ft) wide, which means 40 percent more working width over the current 13.1-m (43-ft) model. This gain in working width can save up to nine passes per quarter section during the same amount of time spent in the tractor cab.

An increase in productivity positively contributes to agronomics. Improving a grower’s productivity will increase the likelihood of hitting the seeding window while minimizing the chance for yield declines.

The opportunity for the 18.3-m (60-ft) 1895 model compared to the 13.1-m (43-ft) model is a $1,500 gain in wheat yield and $2,700 gain in canola yield from increased productivity. The productivity gain for the 18.3-m (60-ft) 1895 paired with a C850 Air Cart can save a grower up to nine passes per quarter section. Overall, this drill was designed for productivity and efficiency.

Separate fertilizer placement (SFP) offers growing advantages
Separate fertilizer placement offers exceptional nutrient placement at a 5 or 7-degree angle
5-degree SFP opener5-degree SFP opener

The 5-degree fertilizer opener:

  • Is ideal for liquid and anhydrous (NH3) fertilizers
  • Will also apply dry fertilizer  
  • Opens a smaller trench than the 7-degree opener
  • Is better able to capture anhydrous and liquid fertilizer and seal these fertilizers in the soil
Fertilizer tubes
SFP with dual tubesSFP with dual tubes
Dry tube (A)Dry tube (A)
NH3 tube (D)NH3 tube (D)

There are four choices of interchangeable fertilizer tubes:

A) Dry fertilizer tube to be used with 32-mm (1-1/4-in.) secondary fertilizer hose from the 1910 Commodity Cart.

B) Liquid fertilizer tube (for 13-mm [1/2-in.] i.d. hose).

  • IMPORTANT: Using this tube for anhydrous may cause loss of retention.*

C) Dual fertilizer delivery tube. Allows for placement of dry OR anhydrous. If applying both simultaneously, the operator may need to provide a relief system to relieve air from dry tube for adequate anhydrous retention. Without air relief, the operator will need to adjust air plenum to restrict all airflow to SFP dry tubes when anhydrous is being applied.*

D) Anhydrous tube (for 10-mm [3/8-in.] i.d. hose).*

 

*Liquid or NH3 fertilizer metering/delivery system is not provided by the John Deere Seeding Group.

Key features of the SFP opener are:

  • 457.2-mm (18-in.) opener blades operate at 5 degree resulting in a narrow trench with less soil disturbance.
  • Fertilizer tubes are interchangeable among dry, liquid, or anhydrous (NH3).
  • Closing wheel assembly is closer to the fertilizer delivery tube; provides increased fertilizer retention.
  • Closing wheels are base equipment on anhydrous openers and optional on liquid and dry openers.
    • NOTE: Closing wheels are recommended when dry soil conditions are common.
  • Extended-wear (chrome alloy) fertilizer boots are standard equipment.
  • Bearings are sealed and non-greaseable.
  • Choice of three gauge wheels
  • Depth adjustments in 6-mm (1/4-in.) increments from 13 mm to 89 mm (1/2 in. to 3.5 in.) deep.
Opener furrow-closing wheel

The 25-mm x 305-mm (1-in. x 12-in.) cast closing wheel follows the press wheel to close furrow, placing soil over seed or fertilizer after the press wheel secures seed in furrow.

  • A double-row ball bearing to reduce wear is located in the arm of the closing wheel
  • Mounted parallel to the furrow opener, the closing wheel can be adjusted laterally to allow running on top of furrow for sandy or mellow soils or to side of furrow for heavier soils
  • Down pressure is adjustable from 11.8 kg to 19.5 kg (26 lb to 43 lb) (no tools and three adjustments)
  • A grease fitting in the pivot arm provides free movement for the arm

NOTE: The closing wheel is optional on the fertilizer openers.

Opener gauge wheel

114.3-mm x 406.4-mm (4.5-in. x 16-in.) semi-pneumatic wheel gauges depth.

  • Standard steel rim gauge wheel for conservation applications
  • Optional smooth plastic hub for minimal soil disturbance in mellow soils
  • Depth can be controlled from 6-mm to 89-mm (1/4-in. to 3.5-in.) in 6-mm (1/4-in.) increments (13 total adjustments)
  • Runs on sealed, double-row tapered ball bearings

76.2-mm x 406.4-mm (3-in. x 16-in.) gauge wheel (optional)

  • Provides less stubble or residue disturbance
  • Depth can be controlled from 6-mm to 90-mm (1/4-in. to 3.5-in.) in 6-mm (1/4-in.) increments (13 total adjustments)
Green-on-green integration - tractor, cart, and display compatibility

The 18.3-m (60-ft) 1895 Disk Drill has five sections with 254-mm (10-in.) spacing and is Air Power™ 2 compatible. This larger tool will require a 15,152.8-L (430-bu) tow-between cart, a 15,152.8-L or 19,381.5-L (430-bu or 550 bu) tow-behind cart, or the C850 Air Cart with Air Power 2 dual fan system. Along with this cart compatibility, below is the tractor, horsepower, display, and engine compatibility details.

Cart compatibility
#

Along with the added tool size, the 1895 offers a heavy-duty hitch to pull an additional 20,412 kg (45,000 lb), which is the equivalent of two 7571-L (2,000-gal.) NH3 tanks when using a tow-between cart.

Tractor compatibility
#
  • Recommended minimum 425-kW (570-hp) tractor with a 295.3-L/min (78-gpm) high-flow pump
  • Follow recommended ballasting guidelines
  • Requires a tractor with four selective control valves (SCVs) plus power beyond
  • Requires a brake port for 1910 and C850 Air Cart brakes
    • Flat ground - seeding less than (2.5 cm (1 in.)
      • 425 kW (570 hp)
    • Flat ground - seeding greater than 2.5 cm (1 in.)
      • 462.3 kW (620 hp)
    • Hilly terrain - seeding at any depth
      • 462.3 kW (620 hp)
Engine power capabilities
#
  • The seeding tool system must be compatible with the maximum power that the largest Final Tier 4 (FT4) or comparable manufacturer’s tractor can produce.
  • FT4 tractors have an advertised engine horsepower of up to rated power level of 462.3 kW (620 hp). Power bulge for short periods of time increase this to 499.6 kW (670 hp).
  • Pulling a full 15,152.8-L (430-bu) cart requires about 51.5 kW (69 hp), the 19,381.5-L (550-bu) cart requires about 66.4 kW (89 hp), and the 29,953.2-L (850-bu) cart requires about 96.9 kW (130 hp).
Display compatibility
#

This larger tool was designed for the Gen 4 CommandCenter™ display. This technology integration saves time and money.

  • 4600 CommandCenter™ display with Premium Activation
  • 4640 Universal Display with core activation
TruSet™ system downforce control
Downforce control from the cabDownforce control from the cab

TruSet downforce control enables operators to conveniently set values for the seed and fertilizer ranks independently from the cab. This feature enables them to meet optimal downforce pressure while in varying soil conditions. TruSet downforce control improves seed placement accuracy in varying field conditions, leading to improved emergence and plant maturity.

TruSet system quick-reference guide
#

TruSet system quick-reference guide image key:

  1. Select here to choose from a list of programmed downforce setpoints.
  2. Select here to enter calibration screens, input downforce setpoints, and to verify the tractor selective control vavle (SCV) controlled by automation.
  3. TruSet – main menu button
  4. TruSet Run Screen
  5. Setup – select to configure tool
  6. Warning Setup – select to set downforce warnings
  7. Float Mode – select to toggle the float mode on and off. This option is only available using Power Beyond control options.
  8. Diagnostics – select to enter diagnostic information
  9. Press the plus or minus button to increase or decrease the downforce.
  10. Enter a value here to increase or decrease the downforce.
  11. Enables the downforce system
  12. Disables the downforce system
TruSet system tool setup
Tool setupTool setup

Select the tool setup to enter calibration screens, input downforce setpoints, and to verify the tractor SCV controlled by automation:

  1. Enter target setpoint for downforce
  2. Enable pick 6 prescription
TruSet system tool setup - automated SCV
#

TruSet system tool setup - automated SCV image key:

  1. This is the time that the SCV remains on to ensure that Power Beyond activates.
  2. Select SCV configuration
  3. Enable or disable continuous SCV time
  4. Select opener control SCV (SCV1-6)
  5. Select opener control (SCV with Power Beyond, SCV only)
TruSet system tool setup - manual SCV
#

TruSet system tool setup - manual SCV image key:

  1. Select opener control SCV Manual (---)
  2. Select SCV configuration
  3. Enter values for the extend and retract thresholds if necessary
  4. Select opener control (SCV with Power Beyond, SCV only)
TruSet system tool setup - Implement Detection
#

TruSet system tool setup - Implement Detection image key:

  1. Select Implement Detection
  2. Select tool mode
  3. Press to save the values
  4. Select row spacing
  5. Select nominal tool width
TruSet system tool setup - opener configuration
#

TruSet system tool setup - opener configuration image key:

  1. Select opener configuration
  2. Enable and disable opener control
  3. Select opener depth setting (1 through 13)
Proven no-till openers provide excellent penetration with rugged durability
Seed placement with 90 Series OpenerSeed placement with 90 Series Opener
#

90 Series Single-Disk No-Till Openers are in base equipment on all 1890 and 1895 Separate Fertilizer Placement (SFP) and 1990 Central Commodity System (CCS™) Air Drills.

On the 1890 models, the single-disk openers are on 190-mm (7.5-in.) or 254-mm (10-in.) row spacing. On 15.25-m (50-ft) and 18.30-m (60-ft) 1890s, the 190-mm (7.5-in.)/380-mm (15-in.) or 254-mm (10-in.)/508-mm (20-in.) dual-row spacing feature is in base equipment. The single-disk openers provide consistent and accurate seed placement.

The single-disk openers are gang mounted and are hydraulically raised and lowered. The hydraulic downforce system also offers a wide range of downforce settings for the openers.

Active hydraulic downforce pressure valveActive hydraulic downforce pressure valve
#

The active hydraulics:

  • Work in conjunction with the opener spring 
  • Provide an adjustable range of 75 kg (165 lb) to 180 kg (400 lb) of down pressure per opener
    • Benefit: Penetrate hard soils and heavy residue. 
  • The cylinders allow the openers to travel up or down an additional 405 mm (16 in.) with active hydraulic down pressure to follow the ground
  • Provide the openers additional pressure when needed or allow the openers to go into relief if the pressure becomes too high

The down pressure:

  • Is easily adjusted with the pressure valve located on the front of the mainframe
  • Provides the operator the ability to quickly adjust, or dial in, the down pressure as operating conditions change  

NOTE: For additional ballast in hard-to-penetrate conditions, tractor suitcase weights may also be added to the mainframe and wings to obtain maximum down pressure per opener.

 

The 90 Series No-Till Openers:

  • Work not only in no-till conditions, but also in minimum or reduced-till conditions
  • Provide 51 mm (2 in.) of free travel in the opener before spring down pressure takes over
    • Benefit: Allows the opener to move over uneven ground conditions and minimize the chance of the gauge wheels bulldozing soil in soft or mellow conditions
    • The opener spring travels a maximum of 200-mm (8-in.) up or 150-mm (6-in.) down before the hydraulics react to uneven seedbeds.
Heavy-duty frame provides long life and enhanced capability
Heavy-duty frameHeavy-duty frame

The heavy-duty frame is built for years of use seeding over large acreages and rolling fields. The weight of the five-section frame enhances the capability to pull more behind the toolbar. It is compatible with the C850 Air Cart plus 7571-L (2000-gal.) twin anhydrous tanks. The durability of the frame has been improved to handle this fully loaded machine weighing 28,848 kg (63,600 lb). It includes a rear hitch for the C850 plus inner and outer wing weight brackets that can hold five suitcase weights on each inner wing plus two suitcase weights on each outer wing.

Two choices of 90 Series fertilizer openers
Dry fertilizer opener with optional closing wheelDry fertilizer opener with optional closing wheel
#

The 1895 Separate Fertilizer Placement (SFP) offers the 7-degree fertilizer openers as standard equipment. 

 

The 7-degree opener:

  • Opens a wider trench versus the 5-degree opener
  • Is ideal for dry fertilizer application
  • Has an optional closing wheel

 

The optional 5-degree opener:

  • Opens a narrower trench vs. the 7-degree opener
  • Is more effective for sealing liquid and anhydrous fertilizers versus the 7-degree opener
  • Has an optional closing wheel for dry and liquid
    • In base equipment with anhydrous tube (NH3)
  • Will also apply dry fertilizer

IMPORTANT: Do not apply NH3 without the closing wheel.

The 7-degree openers have several other features:

  • 457.2-mm (18-in.) blade running at 7 degree cuts narrow trench
  • Three optional depth gauging wheel choices
  • Depth range is 13 mm to 89 mm (0.5 in. to 3.5 in.), adjusted in 6-mm (0.25-in.) increments
  • Fertilizer boot offers excellent placement of dry fertilizer
  • Triple-lip, dual-tapered-roller main-hub bearings
  • Optional cast-iron closing wheel
  • Optional extended-wear cast-alloy fertilizer boots
  • In-furrow press wheel is not included
Opener gauge wheel

The 114.3-mm x 406.4-mm (4.5-in. x 16-in.) semi-pneumatic wheel gauges depth.

  • Gauges depth
  • Standard steel rim gauge wheel for conservation applications
  • Optional smooth plastic hub for minimal soil disturbance in mellow soils
  • Depth can be controlled from 6-mm to 89-mm (1/4-in. to 3.5-in.) in 6-mm (1/4-in.) increments (13 total adjustments)
  • Runs on sealed, double-row tapered ball bearings

 

The 76.2-mm x 406.4-mm (3-in. x 16-in.) gauge wheel (optional):

  • Provides less stubble or residue disturbance
  • Has the same depth adjustments and increments as 114.3-mm (4.5-in.) gauge wheel
Opener press wheel—On seed openers only

NOTE: Fertilizer openers do not have a press wheel.

Opener furrow closing wheel—optional

The 25.4-mm x 304.8-mm (1-in. x 12-in.) cast closing wheel follows the press wheel to close the furrow, placing soil over the seed or fertilizer after the press wheel secures the seed in the furrow.

  • A double-row ball bearing to reduce wear is located in the arm of the closing wheel
  • Mounted parallel to the furrow opener, the closing wheel can be adjusted laterally to allow running on top of furrow for sandy or mellow soils or to side of furrow for heavier soils
  • Down pressure is adjustable from 11.8 kg to 19.5 kg (26 lb to 43 lb) (no tools and three adjustments)
  • A grease zerk in the pivot arm provides free movement for the arm

NOTE: Closing wheel is optional on fertilizer openers.

Air Power™ 2 fan system and compatibility
Air Power 2 fan systemAir Power 2 fan system

Enhanced air seeding performance would not be possible without the updates to the 15,152.8-L (430-bu) and 19,381.5-L (550-bu) 1910 and C850 Air Carts. For the wider seeding width, more fan capacity has been added.

Air Power 2 provides two independently controlled fans – one for seed and one for fertilizer. Along with large, 76.2-mm (3-in.) primaries, more accurate delivery rates are possible across the full width of the seeding tool, from opener to opener. Plus, Air Power 2 allows growers to deliver high rates under field operating conditions – up to 40 percent more product delivery per primary compared to the single-fan system.

Dual fans are required for tow-between and tow-behind carts on the 23.2-m (76-ft) 1870 and 18.3-m (60-ft) 1895 models along with the eight primaries. Each fan will direct air to one set of primaries. Two selective control valves (SCVs) are required for the fans. The fan speed will be controlled through the SCV flow control.

Air Power 2 will also be compatible with the current 17.1-m (56-ft) and 23.2-m (76-ft) 1870 Air Hoe Drills, as well as the 18.3-m (60-ft) and 13.1-m (43-ft) 1895 Disk Drills, plus the 15.2 (50-ft) and 18.3-m (60-ft) 1890 models. An option is available for stainless-steel primaries to resist corrosion from high fertilizer rates.

C850 Air CartC850 Air Cart

There is a slide at the meter to choose bottom or top shoot for each meter. There is also a valve on the tank pressure system to choose top or bottom shoot. This same valve is used to adjust the amount of air to the tank to create the proper pressure differential.

The arrow on the valve handle should be pointing to the top of the range for the top shoot and the bottom of the range for the bottom shoot. If the tank will not be in use, set the pressure valve to the middle setting to not pressurize the tank. The operator should use the gauge to find the correct setting. An electronic pressure sensor will send a warning to the display if the tank pressure differential is out of range.

If pressure is in the green operating range, the tanks are sealed and operating correctly. The electronic pressure sensor is located behind the mechanical gauge on the side of the cart.

Specifications

Sizes
Working widths 18.3 m
60 ft
Spacing Seed spacing - 254 mm
10 in.
Separate fertilizer - 508 mm
20 in.
Number of ranks Two seed ranks and one separate fertilizer rank
Number of sections Three
Dimensions
Transport height 5.2 m
16.92 ft
Transport width 5.7 m
18.83 ft
Road clearance 21.59 cm
8.5 in.
Overall length 11.6 m
38.17 ft
Centerframe width 4.55 m
14.9 ft
Weight before ballast 28,213 kg
62,200 lb
Available ballast 1,451.5 kg
3,200 lb
Frame Cross members
102 x 152 mm
4 x 6 in.End tubes
51 x 152 mm
2 x 6 in.Hitch
152 x 254 mm
6 x 10 in.
Clearance from rank to rank 134.1 cm
52.8 in.
Tires
Mainframe standard (8) 42.1x 21.7x 22.5 in. 12PR
Mainframe bolt pattern Duals with eight-bolt wheels
Wings standard (16) 33x15.5-16.5 in. 10PR
Wings bolt pattern Duals with eight-bolt wheels
Openers
Style ProSeries™, single disk blade - 45.7 cm
18 in.
Fertilizer, single disk blade - 45.7 cm
Rank lock-up Front, middle, and rear
Disk Diameter
45.7 cm
18 in.Angle
Seed at 7 degree (angle)
Fertilizer (dry only) at 5 or 7 degree (angle)
Single blade with beveled edge
Down pressure Style
Active hydraulic downforce10-in. space
75 to 181 kg
165 to 400 lb
Hydraulic
Depth control Description
Semi-pneumaticWheel size
Standard - 11.43 x 40.64 cm
4.5 x 16 in.
Narrow gauge wheel - 7.62 x 40.64 cm
3 x 16 in.Range
1.27 to 8.89 cm
0.5 to 3.5 in.Increments
0.64 cm
0.25 in.
Gauge wheel
In-Furrow press wheel Material
Rubber-face press wheelPacking force
2.3 to 21 kg
5 to 45 lb
1.8 x 25.4 cm
0.71 x 10 in.
Furrow closing Description
Closing wheel - vertical 15 degree (angle)Size
2.54 x 30.48 cm
1 x 12 in.Material
Cast ironDown force
12 to 20 kg
26 to 43 lb
Yes
Double-Shoot capable Yes - front ranks apply fertilizer

Accessories and Attachments

Frame

Wing Weight Brackets, One for each Wing - BA29471
Wing weight bracketWing weight bracket

Allows addition of up to six tractor suitcase weights on each wing.

 

NOTE: Wing weights and markers are not compatible.

Hydraulics

Open Center Kit with Closed Center Change Valve - BA28095
Open center kit conceptOpen center kit concept

This pilot-operated check valve traps oil to opener cylinders, maintaining pre-set pressure when tractor valve is neutralized.

 

This kit is required if the tool will be connected to tractors with open center hydraulic systems. If the tractor valve is not neutralized on open center tractors, damage will result to the tractor (heat build-up in the hydraulic system).

 

The kit includes the check valve, pilot line, and necessary hydraulic fittings for installation.

Wheels and Tires

One 31 x 13.5 - 15 In. 12 PR Hi-Flotation Tire and 8-Bolt Wheel - BA32507
Spare Tire Mounting Bracket - BA28029
Spare tire mounting bracketSpare tire mounting bracket

The spare tire mounting bracket will be installed at the factory if ordered with the machine and will accommodate mainframe tire and wheel sizes.

 

Hardware is supplied with the bracket to attach it to the frame if ordered as an aftermarket bundle.